Accessories Catalogue
We Manufacture Custom Design Accessories
DAS-200
Dryer Amp Sensor
This sensor can be mounted to an electrical junction box or conveniently located on the fuse/breaker panel. When dryer is started, power passes through the sensor which becomes activated and automatically starts the booster fan.
DAS-250
Dryer Amp Sensor
This controller senses when a clothes dryer is drawing 1.2 AMP of current. When this occurs a relay contact closes turning the dryer vent booster fan "ON". When current drops below the 2 AMP threshold the relay contacts open turning the booster fan "OFF". The sensor is designed to mount in a standard electrical box. The AMP Sensor may be placed in an electrical box adjacent to the junction box in which the wires supplying power to the dryer are located (see back of this page). The dryer supply neutral (white) wire passes through the center of the AMP Sensor donut. No physical connection is made.
DHB-100
Dryer Heat Sensor
Heat sensor unit is installed in the exhaust pipe of the dryer. During dryer operation, heat is produced allowing the sensor to automatically engage the booster fan.
DSC300-240 and DSC300-115
Dryer Starter Control Box
The dryer starter control box is a pre-wired unit with dryer plug for easy and simple installation for the electrician. This control works in conjunction with the booster fan. When booster fan is in ON it will engage power to the starter control box and only then the dryer can be turned ON.
Copyright (c) 2009 Reversomatic.